2013 macbook screwdriver driver#

Also, remove the plastic tab holing the hard driver in place and attach it to your new drive.Р”Р€)Take out your old drive and remove the mounting screws using the Torx T6 screwdriver. I highly suggest buying an SSD instead, because they are EXTREMELY FAST, they are DEAD SILENT, they are immune to drops and/or movement and finally, you get about 2h of more battery.Р”Сћ) Remove the plastic bracket holding the stock HDD in place, by unscrewing the 2 recessed screws using your Philips #00 screwdriver. Otherwise you'll just end up with a slower SSD/HDD than advertised.Р”РЋ) Buy a faster and a more spacious HDD, such as a 500 GB Velociraptor 7200 RPM HDD. !!!!! Before buying a new driver, be sure to check your motherboard drive connector!!! Modern SSD's support speeds of up to 6GB/s (SATA 3), so you should make sure your laptop supports SATA 3, before buying a new SATA 3 drive. Repeat the process with the 2nd RAM module.Р”Р€) Now insert your new RAM modules by holding them at a 40 degree angle (and no, you don't have to measure it :P ) and again, GENTLY insert your RAM into the RAM slots. By filling both of the RAM modules inside your MBP, it will perform much faster than with just 1 filled module.Р”Сћ) Take out your old RAM modules by pressing the levers onwards( sideways) and gently take out your RAM.

2013 macbook screwdriver mac#

To check out your frequency, go to Apple-About This Mac and you should see your required RAM memory.Р”ВUAL CHANNEL setup: Don't forget to buy 2 RAM modules instead of just 1. This is a really important step, because otherwise it can damage the internal components of your MacBook Pro.Р”РЋ) Buy 2 RAM modules of the same frequency as your stock RAM.

DON'T forget to take out ANY connected devices (such as USB dongles/receivers)Р”Сћ) Remove all of the 10 screws holding the back cover (3 long 14.4 mm screws and 7 short 3.5 mm screws) and take the back cover off.Р”Р€) Touch a metal surface (such as the optical drive) in your MBP to discharge any static energy from your body. Torx T6 screwdriver for removing the HDD mounting screwsР”РЋ) Turn off your MBP and let it cool down for at least 10 min, before taking the back cover off. Philips (PH) #00 screwdriver for taking the back cover off NOTE: This tutorial works on ALL unibody MacBook Pros (all the models beginning from 2008)

2013 macbook screwdriver pro#

We believe the bestway to do this is to begin a new era of personal computing software where OS upgrades are free.Upgrading my 2011 MacBook Pro stock HDD -320 GB/5400rpm- to a Samsung 830 Series SSD -128GB- and the RAM memory from 4 GB (1333 Mhz) to 8 GB (Corsair 1333 Mhz) 'We want every Mac user to experience the latest features, the most advanced technologies, and the strongest security.

'Mavericks is an incredible release, which introduces significant new apps and features, while also improving the performance and battery life of your Mac,' said Craig Federighi, Apple'ssenior vice president of Software Engineering.

2013 macbook screwdriver windows#

Phil Schiller, Apple's senior vice president of worldwide marketing also talked up the inclusion of Thunderbolt ports and claimed Wi-Fi is three times as fast as previous generation thanks to 802.11ac support.Р”В«oth devices will come equipped with Apple's latest Maverick's operating system, which the Californian company claims has more than 200 new features, including a refreshed version of Safari, it's custom web browser, enhanced multi-display support and increased power efficiency.Р”Р„lso on board is Finder Tags, which helps organise your files on iCloud (read our sister site CloudPro's iCloud review), and Finder Tabs, which consolidates multiple Finder windows into a single window with multiple tabs. Both laptops start shipping today (22 October 2013).